Service Hotline
+1 4152729688
Tel：
+1 4152729688
Flange ball valve made of ductility (GGG40)
PN 16, DN 25 to 150
Full bore, structural length F4, various ball materials (GG25, brass, stainless steel),
Various sealing materials
Gas DVGW certified PN 16, silicone free, oil free, and grease free available
Flange ball valve made of ductility (GGG40)
PN 16, DN 125 to 250
Full bore, structural length F5, various ball materials (GG25, brass, stainless steel),
Various sealing materials
Gas DVGW certified PN 16, silicone free, oil free, and grease free available
The material of the flange ball valve is cast steel (GS-C25) or stainless steel (1.4408)
PN 16/40 DN 15-100- Full bore, structural length F1+F4,
Various bullet materials (GG25, brass, stainless steel), various sealing materials (PTFE, TFM antimony coal)
Gas DVGW certified PN 16/40, TA air, VD T Å V 1065/TRB 801 No. 45, fire resistant to BS 6755
Compact ball valve made of steel (C22) and stainless steel (1.4301 or 1.4401)
PN 16, DN 15 to 200
Full bore, short length
Various ball materials and sealing materials
Threaded stainless steel (1.4408) single piece, two piece, or three piece ball valves
Three piece valve with welded end or flange, DN 4 (1/8 ") to 100 (4"), reduced or full bore.
The series has gas DVGW certified MOP5, biological, landfill, and sewage gas, silicon free, oil and grease free, and can be provided in blind corner versions
Stainless steel flanged ball valve (two-piece housing with central flange)
(1.4408), PN 16/40
DN 15 to 100- F4, length DN 125-200- F5,
Full bore length, ball material stainless steel (1.4408), PTFE seal, silicon free
In addition to our ball valves, we also offer:
Spindle extension
DN 125 gear
Terminal position feedback
Position indication of automatic ball valve
Gas and safety valves that meet technical requirements
Overflow valve
Hot valve backup
Brass three-way ball valve
Various series
Threaded connection (internal thread), full bore or reduced bore
The ball material is brass, and the sealing material is PTFE.
Ball with L-shaped or T-shaped ports
Stainless steel three-way ball valve
(1.4408) threaded connection (internal thread)
PN 40, DN 6 to 50, reduced diameter
Ball material stainless steel (1.4401), sealing material PTFE+15% GF
Ball with L or T port
District heating ball valve
Steel (St 35.8) DN 15 to 50, PN 40, PN 25, DN 65 to 200
Fully welded, with welded ends or flanges
Length with flange:
DN 15 to 50- F1, DN 65- F5
Stainless steel ball valve
(1.4408) With three piece housing, threaded or welded ends
PN 64, DN 6 to 50, PN 40 to 100
Full bore
Spherical material stainless steel (1.4401), adjustable packing gland
Cast steel (GS-C25) or stainless steel (1.4408) three-way flange ball valve
PN 16, DN 40 to 300
Full bore
Ball material stainless steel (1.4408), sealing material PTFE+15% GF
Ball with L or T port
Brass automatic ball valve
With electric drive (VDC-12/24/110V, VAC-24/110/230 V) or pneumatic actuator
(Single acting or double acting)
Threaded connection (IG/IG) from DN 6 (1/4 ") to DN 100 (4")
Brass or stainless steel three-way automatic ball valve
With electric drive (VDC-12/24/110V, VAC-24/110/230 V) or pneumatic actuator
(Single acting or double acting)
Threaded connection (IG/IG) from DN 6 (1/4 ") to DN 100 (4")
Three way automatic ball valve with flange, available upon request
Stainless steel three piece automatic ball valve
With electric propulsion (VDC-12/24/110V, VAC-24/110/230V, 1-phase motor 230 V, 50 Hz or depending on DN, series) or pneumatic actuator
(Single acting or double acting)
Ball, steel or stainless steel automatic flange ball valves
With electric thrusters (VDC-12/24/110V, VAC-24/110/230V, 1-phase motor 230V, 50 Hz or 3-phase motor 400V, 50 Hz,
