Service Hotline
+1 4152729688
Tel：
+1 4152729688
Technical data of BK&mikro BKM93 controller:
Control unit BKM93 Basic
Article No. 63 04 244
Shell insulation material, protection level II, built-in type
Protection level IP 20
Dimensions (W x H x D) 22.6mm x 99mm x 113.6mm
Install the shell profile guide rail 35 mm acc. DIN EN 50022
Power supply voltage 24 VDC ± 20% PELV, Imax=1 A
Maximum power consumption 24 VA
Control voltage 24 VDC ± 20% PELV
Input electrical isolation
Input current approximately 5 mA
Pulse duration 30 ms min
Switch output 2 x electronic relay 24 VDC, maximum 1 A, infinite switching cycle
Connect pluggable screw terminals for power supply, relay output, and control input
Circular connector, 8-pin (scanner connection)
Mini USB
The climate conditions are suitable. Level 3K3 meets. EN 50178
Environmental temperature from 0 ° C to+50 ° C
Storage temperature -20 ° C to+80 ° C
Basic features of BK&mikro BKM93 controller:
The control unit of BK Mikro has many advantages: compact
Design, powerful functionality, and correct connectivity
To the system network - don't forget the great flexibility of subsequent system adaptation.
Mini USB for PC connection
3 digital control inputs (positive or negative logic): start and teach signals, as well as configurable channels
2 relay outputs (as N/C or N/O contacts) with "OK" and "KO" signal
Pluggable power supply voltage and scanner connection
4 LEDs for current status display
BK&mikro BKM93 controller advantages:
·Mini USB for PC connection
·3 digital control inputs (positive or negative logic): start and teach signals, as well as configurable channels
·2 relay outputs (as N/C or N/O contacts) with "OK" and "KO" signals
·Pluggable power supply voltage and scanner connection
·Expansion module for multi tool monitoring of top hat rail plug opening for optional connection of I/O)
·4 LEDs for current status display
·Teaching button
