Ramschit cylinder clamping action:

Applying fluid pressure to Port A will push the plunger. Applying fluid pressure to Port B will retract the plunger (double acting).

Installation method of Romschit oil cylinder:

1. Insert four Allen screws from the plunger end and pass them through the four countersunk holes parallel to the plunger;

2. Insert four hexagonal socket screws from the bottom and pass them through the four countersunk holes parallel to the plunger; 3) Thread two Allen screws through two wide sided holes perpendicular to the plunger.

3. The cylinder block is required to support pressure exceeding 2300 psi through rectangular bars or locating pins with a height of at least one-third of B size.

1/4 "BSPP ports (two for double acting fixtures). Larger sizes have 1/2" BSPP ports. Do not use NPT connectors.