Service Hotline
+1 4152729688
2023-09-21 16:11:08
The working principle of a CAM pump is similar to that of an external gear pump, such as the flow of liquid inside the housing. The hydraulic pump uses a CAM instead of a gear tooth. Three or four leaves can be used as needed.
Compared with the gears of the external gear pump, the convex angles do not contact each other. The external steering wheel of the gearbox prevents blade contact.
The support bearing of the pump shaft is located in the gearbox. Since these bearings are not in the pumping fluid, the pressure is limited by the deflection of the shaft and the bearing position, which reduces the noise level of the pump. With fewer blades and larger blade size, the pump can achieve higher emissions.
Advantages of CAM pump:
1. Changes in rotation cause flow reversal.
2. Easy to maintain
3. High flow density
4. Low pulsation
5. Continuous flow
6. Precise dosage
7. Flow is proportional to speed
The above content introduces what is a CAM pump and what are the advantages of a CAM pump. In addition, Shenzhen Oudejie Technology specializes in the sale of new imported CAM pumps, and promises to sell products are new imported, while providing our customers with quotation, selection, product information and other services.