1. The connecting rod of the output shaft coupling should be fixed when in use and ensure that the two shafts are parallel to the base and the caliber bolts that need to be installed are fitted to ensure that the gear motor is reliably closed.

2, all installed on the output shaft of the equipment shaft must be light, do not use a hammer or other blunt objects to knock the output shaft, so as to avoid too tight installation caused by bearing damage.

3, belt pulley, sprocket in the assembly as close as possible to the load gear, to help reduce bearing bending stress. Sprockets, belts and other connecting shafts with output shaft diameters not exceeding 6 times should be used. Please use with H7 tolerance to avoid noise and any abnormal damage to the axial plane during use.

4. After installation, appropriate anti-rust oil or anti-rust agent can be coated on the surface of the output shaft to protect the output shaft from rust.

5, according to the power supply voltage, choose the appropriate wiring mode to connect the electrical junction box wiring. Incorrect wiring of the junction box can cause the motor to burn out. According to the rated current of the motor nameplate, it is recommended to select the current density of the power cord of the appropriate size to the wire in 5A/m ·M.

6, when you use the brake function of the driver to power the motor, the brake line (yellow) need to separate AC 220V power supply, the power should be synchronized with the motor power supply.

7, reducer motor gearbox oil has been raised good fit, do not use before refueling. Normal use of more than 10,000 hours, can be appropriate to add 0 no grease.

8, after the installation is completed, re-check whether the gear motor installation code is smooth, to ensure that there is nothing on the top of the motor, otherwise it will cause the motor to burn.

The above content is the installation method of Wanxin planetary reducer. In addition, Shenzhen Oudejie Technology specializes in the sale of new Wanxin planetary reducer, and promises to sell products are new original imports, while providing our customers with quotation, selection, product information and other services.