The tool is firmly fixed in the spindle taper by clamping jaws. These fingers are pulled into the cone by the spring set of the power tie rod. The patent's reinforcement mechanism multiplies the pull. The spring force applied to the clamping sleeve pushes the ball outward. The Angle design of the clamping ring and cylinder shoulder increases the spring force by 300%. The CAM in the spindle is closed and the tool is firmly locked.

Hydraulic loss or reduction will not release the tool. The power off design requires pressure to be applied to the hydraulic piston and transmitted through the rod to push the clamping sleeve down. This unlocks the reinforcement mechanism. After removing the CAM, the gripper opens and the surface of the gripper ejects the tool in a controlled stroke.

OTT-JAKOB pull rodAdvantages include:

1. Power off and clamp.

2. Increased spring force.

3. Compact design with minimum rotation mass.

4, the spindle bearing no load during tool change and the required low tool release force.

The above content is the advantage of OTT-JAKOB rod, Shenzhen Oudejie technology professional sales of imported OTT-JAKOB rod, and committed to sales of products are new original imports, while providing customers with quotation, selection, product information and other services.