OTT-JAKOB pulling gauge is an instrument used for measuring force, widely used in various industrial fields, laboratories, and quality control fields. It can test the force of a length free torsion spring, as well as many other types of force. This article will provide a detailed introduction to the use of OTT-JAKOB pulling gauges.

The usage steps are as follows:

1. Preparation work

Before using a pulling gauge, some preparatory work needs to be done, including checking whether there is wear or other faults on the outside of the instrument. If there are any faults, they should be replaced in a timely manner; Slowly rotate the tension gauge one turn to ensure that its internal device is in normal operation.

2. Insert the item to be measured

Place the item to be tested on a stable surface, ensuring that its upper and lower surfaces are flat. Then, pass the sensor of the pulling gauge over the item so that it is exactly above the axis of the item. Gently adjust the gap between the test item and the sensor to ensure the accuracy of the test

3. Start testing

Select appropriate units and display modes, set the measured display value of the pulling meter to near zero, and then start testing. When the test item is subjected to external force, the reading of the pulling gauge will correspondingly increase, and multiple measurements will be made to ensure the accuracy of the results. During the pulling process, the degree of force application should be gradually increased to avoid errors.

4. End Test

After the test is completed, it is necessary to stop using the pulling gauge and gently clean its sensor section. Be careful not to violently collide with the pulling gauge device to avoid damage. When storing tension meters, they should be stored in a dry, dust-free, and moisture-proof environment to maintain the sensitivity of the pulling meter sensor.

The above content introduces the usage method of OTT-JAKOB pulling gauge. In addition, Shenzhen ODJ Science & Technology Co., specializes in selling brand new original imported German OTT-JAKOB pulling gauges, and promises to sell all products with brand new original imports. At the same time, we provide customers with quotation, selection, product information and other services. For more product and technical information needs, please go to the official website of Shenzhen ODJ Science & Technology Co., Ltd. to search for contact information and further consult and understand.