When selecting the TURCK pressure switch, several selection criteria need to be considered. Here are some important standards:

Working temperature: The working temperature can affect the materials used. Some materials will degrade at high temperatures.

Process fluid: The chemical properties of the process fluid determine the type of material required for the wetted component. The liquid receiving component is the pressure side of the port, seal, and pressure sensing component. These components must be able to withstand any chemical or physical erosion from the process fluid. The mechanism of component degradation may be through corrosion, oxidation, or erosion.

Pressure type: Positive pressure systems typically use pressure switches. They can also be used for vacuum applications. The negative pressure system requires pressure switches specified for vacuum and composite pressure. Diaphragm is an ideal choice for vacuum and low-pressure applications. Pistons are the ideal choice for high-pressure applications.

Pressure range: Pressure switches have a range that defines their cut-in and cut-out pressures; This is commonly referred to as the scope of work. As a preventive measure, it is recommended to set the set point to 40% to 60% of the pressure range.

Working temperature: The working temperature also affects the materials used. Some materials will degrade at high temperatures.

Pressure switches can be used for a wide range of household and commercial applications, as listed below:

Residential, commercial, and agricultural water pumps use pressure switches to automatically regulate flow.

In order to monitor and control system air pressure, HVAC, gas cylinders, air pumps, etc. use air compressor pressure switches.

When the engine's oil pressure drops below a preset level, the oil pressure switch is used to determine when the oil pressure drops.

Industrial and residential furnace pressure switches are used as safety devices. If the air pressure is low during the start-up of the furnace, they will shut down the furnace.

The well pump pressure switch is used in residential and commercial buildings to extract water from the well and ensure that there is sufficient water pressure in the system to provide water without overpressure.

Vacuum pressure switch measures the vacuum or negative pressure in the system. These components exist in boilers, electric heaters, air compressors, and transmission systems.

The above content introduces the selection criteria and application scenarios of TURCK Turck pressure switches. In addition, ODJ-Tech Global LLC Technology specializes in selling brand new original imported TURCK sensors, and promises to sell all products with brand new original imports. At the same time, we provide customers with quotation, selection, product information and other services. For more product and technical information needs, please go to the official website of Shenzhen Oudejie Technology Co., Ltd. to search for contact information and further inquire and understand.