Shenzhen Oudejie Technology Co., Ltd. specializes in the sale of German original imported newSATA spray gun，At the same time to provide our customers with quotation, selection, product information and other services. The following is to introduce the maintenance and lubrication methods of Sata spray gun in the later period, which is very necessary to learn.

1. The spray gun shall be lubricated with SHARPE spray gun lubricating oil after each cleaning.

2, if there is a "splash" or bad spray type, do not completely disassemble the spray gun.

3. Do not immerse the gun in any solution normally used to clean the gun, unless it is undergoing a thorough overhaul.

4. To clean the gun, please use the following procedure:

A. Remove all repaint from the gun and cup - replace it with 3 to 4 ounces. Compatible solvent. As follows to filter the spray gun: Release the air cap and use 5 psi or less pressure to pull the trigger to the full retreat position, this action will force

The material in the gun head returns to the cup. Repeat until the solvent is clear.

B. Wipe the outside of the gun and cup with a compatible solvent. Blow dry and lubricate.

5, do not use any hard objects, such as wires, paper clips or solder nozzle cleaner to clean the gas cap hole. The gas cap is made of high alloy heat treated aluminum, hard objects will damage the hole.

Clean air cap: Soak it in a compatible cleaning solution and use a soft object, such as a round wooden toothpick or medium bristle brush or reverse purge channel.

The above content is the lubrication method and maintenance method of SATA spray gun in Germany, and I hope it can help you.