Shenzhen Oudejie Technology Co., Ltd. specializes in the sale of German original imported newKono screw pump，At the same time to provide our customers with quotation, selection, product information and other services. In our actual use, the stator damage in the screw pump is inevitable and needs to be replaced. At this time, we need to learn how to disassemble the stator of the screw pump. The following are the disassembly steps:

1. Inject lubricating medium or dimethyl silicone oil from the end of the stator (discharge chamber);

2. Turn the drive shaft or coupling 3-5 times clockwise to fill the whole cavity of the stator with lubricating medium;

3、Loosen the four long bolts, remove the discharge body and support (if the bolts rust, need to spray a little rust remover);

4、Use a fixed stator (can be a chain clamp, pipe clamp or special fixed tools);

5、One person holds the stator in place and pulls it out, and one person turns the drive shaft or coupling counterclockwise to pull the stator out.

The above content is Germany Kono screw pump stator disassembly method, I hope to help you.