BK&mikro Tool inspection systemPart 1 Scanner:

The scanner uses a wand to check the physical location of parts/tools in the machine. If the position of the tool changes due to damage, the system will automatically stop. This ensures the safety of processes, equipment and employees.

Models available from Techna-Tool: TK7A /TK7RL, CNC tool sensor TK8A, TK91A, TK94A, TK94RL, TK9LIN50, TK96A, and TK94A TK96RL

BK&mikro Tool Inspection System Part 2 Controller:

The controller is connected to the scanner by cable. The information from the scanner is passed back to the controller. If there is a problem, the controller outputs a signal to the machine control system to stop the machine. The type of controller varies depending on the application. Some use 24vdc inputs and outputs, others use fieldbus connections, such as DeviceNet or Profibus.

Available models: BK MIKRO BKM91, BKM91D and BKM92KIO advanced controller, BKM9I/O expansion module and BK MIKRO 93 basic controller.

These systems are used as a measure to ensure accurate machine operation. Check each processing cycle. These precautions are taken to avoid higher repair, replacement or maintenance costs. If the problem is detected immediately, damage to the machine or part can be prevented. The broken tool detection system is manufactured with the most advanced technology and attention to design and construction. They are durable, low maintenance, provide accurate results and are easy to operate.

Shenzhen Oudejie technology professional sales of Germany original imported BK Mikro series products, our commitment to sell BK Mikro products are new original imported, and provide our customers with quotation, selection, product information and other services.