Welcome to ODJ-Tech Global LLC
Chinese | English
Home News News

How to adjust the position of the OTT-JAKOB spindle?

2023-09-14 11:26:46

一、Position adjustment principle


The position of the OTT-JAKOB spindle stretching is involved in the accurate positioning of the working center and clamping center. To carry out push -pull campaigns, a certain distance from the working center needs to be established. The clamping intensity of the claw claw is closely related to the position of the clip center. Inaccurate positioning will cause the clamping intensity to be too large or too small, affecting the clamping quality.


二、Position adjustment step


1、First of all, machine tools need to be stopped to avoid safety accidents.


2、Then, remove the claws from the main axis, you can use tools, bolts and other tools to uninstall it. Pay attention to record the location and quantity of the screw in order to replace the record.


3、Then, use the cleaning appliances to clean the dust and impurities in the working position to ensure the accuracy of the subsequent operation and not being influenced by the outside world.


4、Determine the position of the clamping center and the work center, place a data disk on the work center, and then place the positioning block to the clamp center.


5、Subtract the claws on the main axis and fix it. Use a hand wheel or motor to control the claws. The positioning block is used to the data disk to make it one with the working center, and then fix the screw.


6、Whether the adjustment of the claws after the adjustment is accurate. Before the operation, we can use a dedicated corrector to check the accuracy of the claw position.


7、After the adjustment, check whether the claw claw clamping is appropriate, whether the holding workpiece is loose or too tight, and you need to check and adjust in strict accordance with the operating regulations.


三、Position adjustment precautions


Before the operation, you need to read the operating manual of the machine tool carefully, understand the principle and steps of the position adjustment of the claws, and operate according to the safety manual.

The above content introducesOTT-JAKOB spindle pull clawHow to replace the problem. In addition, Shenzhen Oudejie technology professional sales of new imported German OTT-JAKOB spindle claw, and committed to the sale of products are new original imports, while providing our customers with quotes, selection, product information and other services, more product and technical information needs please go to Shenzhen Oudejie Technology Co., Ltd. official website to find contact information for further consultation.

Service Hotline

+1 4152729688

Follow Us

客服

Scan and contact us