OTT-JAKOB spindle gripper is a common accessory on machine tools, which is used to hold workpieces or tools and achieve the machining function of the machine tool. However, the pawl is also one of the vulnerable components that needs to be replaced after a period of use. When replacing the pawl, we need to follow the operating procedures to ensure the smooth replacement operation and ensure the safety performance of the machine tool.

Replacement steps:

1、First stop and start the machine, disconnect the power supply to ensure safety.

2、Use a proper wrench and screwdriver to remove the original pull PAWS. Record the positions and number of bolts after removing the pull PAWS to avoid errors during installation.

3、Clean the installation position and install the new puller. When installing, attention should be paid to adjusting the balance and center of the puller to ensure the accuracy and stability of the machine tool.

4、Fasten the new puller, gently tighten the bolts using a wrench, and fasten them one by one.

5、Check whether the pulling jaw after installation is consistent with the workpiece, and ensure that the clamping force of the pulling jaw is appropriate, neither too tight nor too loose.

6、Restart to test the performance of the puller and check whether its working state is normal

Replacement precautions:

1. Before operation, carefully read the operation manual of the machine tool to understand the specifications and installation method of the claw.

2. Take protective measures, wear necessary safety protective equipment, such as gloves, glasses, etc., to avoid accidents (such as finger injuries, etc.).

3. Before replacing the pawl, carefully check whether the original pawl has cracks or deformation, so as to avoid machine tool accidents due to aging or wear.

4. When installing the new puller, attention should be paid to balance to ensure that it can rotate freely and avoid causing instability of the machine tool or reducing the installation life.

5. After installing the pulling claw, the machining procedure of the machine tool should be readjusted to ensure the accuracy and processing quality of the machine tool.

The above content describes how to replaceOTT-JAKOB spindle puller .In addition, Shenzhen Oudejie technology professional sales of new imported German OTT-JAKOB spindle claw, and committed to the sale of products are new original imports, while providing our customers with quotes, selection, product information and other services, more product and technical information needs please go to Shenzhen Oudejie Technology Co., Ltd. official website to find contact information for further consultation.