Service Hotline
+1 4152729688
How to troubleshoot the solenoid valve? BURKERT solenoid valve troubleshooting
2023-09-23 10:02:29
What is a solenoid valve?
Solenoid valves are used to control the flow of liquid or gas in the system. These valves are used to close, release, mix, or measure liquids or gases. Solenoid valves can be of different types, such as: 2-way, 3-way or other.
1, the solenoid valve opening and closing is not normal
• Check the power supply and make sure the voltage and frequency are correct. Also check the connection.
• Check for dirt/corrosion under the diaphragm, coils burned or components missing
• Check that the flow direction is as indicated on the valve body or in accordance with the limits specified in the valve manual.
2, coil burned, melted or electrified cold
• Check whether the power supply is correct and whether the coil can be ventilated for heat dissipation. Install a new coil. Do not power the coil when it is not installed on the valve.
• Check the interior for moisture and replace if necessary. Also replace any damaged or bent armatures and check the media for compatibility with your valves. Don't forget to move the solenoid valve to a cooler area, or you may increase ventilation around the valve and coil.
3. The solenoid valve leaks
• Check its seals, O-rings, diaphragms for damage or wear, and replace them if necessary.
• Check the valve holes for small chips, sand, and rust particles. Clean all components carefully and make sure pipes are clean.
The above content describes how to eliminate the fault of the solenoid valve.BURKERTBaldor solenoid valveTroubleshooting problem. In addition, Shenzhen Oudejie Technology professional sales of new original imported BURKERT Baode solenoid valve, and promised to sell products are new original imported, while providing our customers with quotation, selection, product information and other services.
