Service Hotline
+1 4152729688
OTT-JAKOB spring advantages and disadvantages!
2023-09-22 15:56:27
OTTspringAdvantages include:
• Prevent another part from moving: The ability to stop another part from moving is one of the biggest advantages of a compression spring. Thanks to this function, the miniature compression spring is now an essential part of the pressure gauge's internal design and operation. The medium of the gauge is pumped under pressure into a hollow tube, which straightens when filled. This pressure causes the tube to move, pushing the connecting rods and gears connected to the miniature compression spring. The position of the pressure indicator is affected by spring resistance, push-back force and resistance.
• Putting parts back in the right place: Latches on doors in cars and buildings are an added advantage that proves the frequency and importance of compression springs. Imagine raising your hand to open a door to get the most out of how a spring works. If this action is used without pulling the door open, the compression spring of the locking mechanism returns it to the locking position. The spring can be compressed by pulling or turning the device; If it stays in place, the spring will remain compressed; Otherwise, it will latch again.
• Apply continuous pressure: One of the most important and surprising advantages of compression springs is in battery-powered products. The constant pressure of the compression spring completes the safe electronic contact required for the internal circuitry of various battery-powered gadgets. Think of the separate battery slots in children's toys or flashlights. The small compression springs in each battery slot need to be gently squeezed to accommodate the battery. In addition to holding the battery in place, the stored energy generated by this compression establishes the conductive connections necessary for the device to draw power from the battery. Users may not be surprised by some of these advantages; In fact, users may be interested in compression springs because of one or the other. Compression springs are undoubtedly the best choice for applications of all sizes.
• Light weight: Considering the amount of force a compression spring can generate, it is very light in weight. Because of the coiled steel, the spring is stronger than when the metal holds its original straight shape. Heating and cooling also strengthen the metal, allowing less material to be used to support heavier weights.
• Affordable: Most compression springs are made of steel and other affordable metals. These metals are widely available around the world and are cheap. Compression springs are one of the most cost-effective options for any use because they contain the least amount of metal.
• Maintenance-free: Compression springs require no maintenance. The spring does not require lubrication, cleaning, special coating or other maintenance to function. The only problem with springs is that they occasionally break. However, replacing a damaged compression spring is a simple process.
Disadvantages of OTT springs include:
• Expensive conical springs
• Becomes weaker if compressed over a long period of time
• Loss of stability and shape over time
• Bending when axial load is increased
• Difficult to repair when damaged
The above content introduces the advantages and disadvantages of OTT-JAKOB spring! The problem. In addition, Shenzhen Oudejie Technology specializes in the sale of new imported OTT-JAKOB spring, and promises to sell products are new imported, while providing our customers with quotation, selection, product information and other services.
