SHERWINSherwin HM-604 penetrantDesigned for capillary inspection of critical welds, including turbine engine components, turbine blades, castings, forgings and extrusions. Sherwin-williams penetrants have excellent penetration properties, wash off well with water, have a slight odor, and can be used in a temperature range of 5 ˚ to +50 ˚ C. Sherwin-williams HM-604 penetrant is applied to the surface of test subjects treated with SherWIN-Williams DR-60 or N-120 cleaner. Penetrant HM-604 is a green liquid of medium viscosity. Under ultraviolet light, the penetrant emits a bright yellow-green glow. The D-100 or D-106 should only be used by developers to improve the readability of quality control results. Penetrant HM-604 is widely used in the automotive and aerospace industries to control welds, castings, forgings and extrusions on material surfaces. Penetrant HM-604 meets the following industry standards: ALLISON, EADS, SAFRAN, BOEING, LOCKHEED, etc. Penetrants are available in 300 ml aerosol tanks, 1, 5, 10 and 25 liter tanks. Shelf life 5 years.

Sherwin osmotic fluid features:

• Biodegradable;

• Flash point above 100 o C;

• Developed on a synthetic basis;

• Wash off easily with water;

• Sensitivity Level 3 corresponding to ISO 3452-2 and sensitivity level 2 for GOST 18442-80;

• Very high sensitivity during fluorescence control;

Sherwin penetrant specifications:

• Color: Green

• Luminous in the ultraviolet range: bright yellow-green

• Flash point: ≥ 100°C

Capillary control Method: Type 1, Method A (Washable)

• Sensitivity rating: 2 according to GOST

• Hold time: 10 minutes

• Operating temperature range: 0 to +50 °C

The above describes the characteristics of SHERWIN HM-604 penetrant. In addition, Shenzhen Oudejie Technology specializes in the sale of new imported SHERWIN Sherwin penetrant, and promises to sell products are new imported original, while providing our customers with quotation, selection, product information and other services.