Welcome to ODJ-Tech Global LLC
Chinese | English
Home News News

Can SHERWIN permeate be used on steel? How to clean Sherwin permeate?

2023-09-21 17:39:35

SHERWIN penetrants can be used in aluminum, magnesium, brass, copper, cast iron, steel, stainless steel, carbides, Stellite, certain plastics and ceramics. The main points of the method are: penetration of the dye penetrant to the defect - removal of excess penetrant from the surface - display indication - check. Dark red indicates that defects will be marked.


The surface should be free of foreign objects and paint. Grease, oils, etc. prevent penetration and should be pre-cleaned with detergent/remover or solvent degreasing removal. Scale, sand, dirt, etc. trap the penetrant and impede removal, so a wire brush or similar pre-cleaning is required. Paint must be removed from the area to be tested.



Osmotic solution cleaning:

1. Apply detergent/remover to the parts or parts to be inspected.

2, let the cleaner stay on the part long enough to dissolve dirt or film.

3. Dry with a clean cloth.

4. Repeat as necessary.

5, after the final cleaning and wiping, leave time to dry before using the penetrant.

6. Check the day of cleaning.



Application penetrant:

1, spray or brush the parts or parts to be inspected, so that the surface is covered with penetrant.

2. If the penetrant returns as a drop, stop and clean the part again.

3, let the penetrant stay on the parts for 10-30 minutes.

4. Locating extremely fine-grained discontinuities may require longer penetration times.



Penetrant removal:

1. When sufficient penetration time is allowed, wipe the surface clean with a clean towel or cloth.

2. Repeat as necessary. Some surfaces just need to be wiped.

3. However, in general, excess surface penetrant is removed using a clean cloth that has been pre-moistened with a cleaner/remover.

4, do not wash the surface with detergent/remover, as this will weaken the sensitivity. Repeat this process with additional wipes until the remaining surface penetrant is removed.



The above content introduces the SHERWIN penetrant can be used on steel, how to clean the Sherwin penetrant problem. In addition, Shenzhen Oudejie Technology specializes in the sale of new imported SHERWIN Sherwin penetrant, and promises to sell products are new imported original, while providing our customers with quotation, selection, product information and other services.

Service Hotline

+1 4152729688

Follow Us

客服

Scan and contact us