OTT-JAKOBPower tie rodAdvantages include: power off clamping, enhanced spring force, compact design with minimal rotation mass, spindle bearing no load during tool change and low tool release force required.

The cutting tool is firmly fixed in the spindle cone by clamping jaws. These fingers are pulled into the cone by the spring set of the power drawbar. Traction is multiplied by a patented reinforcing mechanism. The spring force applied to the clamping sleeve pushes the ball outward. The Angle design of the clamping ring and cylinder shoulder increases the spring force by 300%. The CAM in the spindle closes the claw finger and the tool is firmly locked.

The loss or reduction of hydraulic pressure does not loosen the tool. The power off design requires pressure to be applied to the hydraulic piston and transmitted through the rod to push down the clamping sleeve. This unlocks the reinforcement mechanism. After clearing the CAM, the gripper finger opens and the surface of the gripper ejects the tool in a controlled stroke.

OTT-JAKOB power tie rod provides high clamping force. The supercharger amplifies the spring force and locks the system. The common internal spindle profile allows different tool standards or the same size to be used in the same spindle, and the fixture with bracket can be easily replaced.

In machine tool technology, monitoring pull forces as part of quality assurance is essential to ensure consistently accurate machining results. The OTT-JAKOB Power Check 2 is a test device for measuring the tension of clamping systems. The device is available in four basic versions, ensuring optimal measurement accuracy for each interface.

What are the advantages of OTT-JAKOB power tie rod? The problem. In addition, Shenzhen Oudejie Technology specializes in the sale of new imported OTT-JAKOB rod, and promises to sell products are new imported, while providing our customers with quotation, selection, product information and other services.