1. Non-washable Sherwin osmotic dosage form number:

DP-40 Dye penetrant (non-washable) : DP-40 is a non-washable visible penetrant used to locate cracks, lapses, pores, lack of bonding and similar surface defects. The DP-40 can be used in non-porous components, including ferrous and non-ferrous metals, ceramics and glass. Weld inspection is called the "visible dye penetration" method or the "color contrast" method.

2. Washable Sherwin osmotic dosage form number:

1, DP-50 dye penetrant (washable) : DP-50 is a washable visible penetrant used to locate cracks, lapping, pores, lack of bonding and similar surface defects. The DP-50 can be used in non-porous components, including ferrous and non-ferrous metals, ceramics, glass, and some plastics. A test called the "visible dye penetration" method or the "color contrast" method can be used for weld inspection.

2, DP-51 dye penetrant (washable) : DP-51 is a washable visible penetrant used to locate cracks, lashes, pores, lack of bonding and similar surface defects. The DP-51 can be used in non-porous components, including ferrous and non-ferrous metals, ceramics, glass, and some plastics. A test called the "visible dye penetration" method or the "color contrast" method can be used for weld inspection.

3, BY-LUX Penetrant #1 Double response penetrant: BY-LUX is a washable visible penetrant used to locate cracks, laps, pores, lack of bonding and similar surface defects. BY-LUX can be used in insoluble non-porous parts, including ferrous and non-ferrous metals, ceramics, glass, and some plastics. A test called the "visible dye penetration" method or the "color contrast" method can be used for weld inspection.

Third, high temperature:

KO-17 HI-TEMP* Penetrant: KO-17 High temperature penetrant is a visible dye penetrant used to find surface defects at high temperatures up to 3500F (176.70C). The KO-17 saves weld inspection time and allows inspection at preheat temperatures. Meet low sulfur and low halogen requirements. Since KO-17 operates at high temperatures, the heat drives the contaminants and thermal expansion defects in the defects to capture more penetrant, thus providing a stronger indication.

4. Low temperature:

LPT 85 Dye penetrants (Off-spec) : Approved Type II, Method C solvent removes low temperature penetrants for use at temperatures below 32°F (0°C). Red for maximum color contrast. The flash point is 2°F (-16°C). Use with DR-62 makeup remover and D106 developer. Use a clean, dry rag or towel lightly dampened with DR-62 Remover for removal.

The above content introduces the types of Sherwin penetrant and the classification of SHERWIN penetrant. In addition, Shenzhen Oudejie Technology specializes in the sale of new original German imported Sherwin Sherwin penetrant, and promises to sell products are new original imported, while providing our customers with quotation, selection, product information and other services.